USB 3.0 EXTENDER
EU 3
Features
The USB 3.0 Extender can extend USB signal to a distance up to 100m/328ft over a single CAT6a cable. Transmitter features with one USB 3.0 Type B input, one FSYSNC GPIO input and one RS-232 pass-through. Receiver features with four USB 3.0 Type A outputs, one FSYSNC GPIO output and one RS-232 pass-through. Bi-directional 24V PoC is also supported.
Specification
Technical
USB Protocol
Transmission Rate
Transmission Distance
- USB 3.0
- Up to 5 Gbps
- 100m/328ft over CAT6a (F/FTP) cable
Transmitter
Control
- 1 x RS-232 [3pin-3.5mm Phoenix Connector]
- 1 x FSYNC [1pin-3.5mm Phoenix Connector]
- 1 x USB-C (for update)
Receiver
HDBT In
USB
Control
- 1 x RJ45 Female
- 4 x USB-A
- 1 x RS-232 [3pin-3.5mm Phoenix Connector]
- 1 x FSYNC [1pin-3.5mm Phoenix Connector]
- 1 x USB-C (for update)
Power
Power Supply
- Input: AC 110-240V 50/60Hz
- Output: DC 24V/2A
Power Consumption
- 40W (max)
General
Physical Dimension (W x D x H)
Weight
Housing
Operating Temperature
Storage Temperature
Relative Humidity
- 85 x 100 x 25.5 mm (both transmitter & receiver)
- 0.253kg (transmitter)
- 0.260kg (receiver)
- Metal
- -10 – 45 °C
- -20 – 60 °C
- 20 – 90% RH (no condensation)
Safety
ESD Protection
- Human body model - ±8KV (Air-gap discharge) &
±4KV (Contact discharge)